Low Cost Shim Amplifier Model MX20W

Preis auf Anfrage

The MX20W series shim power amplifier enables shimming of MRI magnets under static and dynamic shim
updating and real time shimming on multiple slices, voxels or regions of interest with simultaneous
compensation of shim induced eddy currents.

Output channels 6
Digital resolution 16 bit
Total output +/-60 A
Maximum current output 20 A per channel, capable of parallel operation
Maximum voltage output DC compliance +/-60 V
Setup control RS-232
Operating control Customer specific ( RS-232, Ethernet, USB, Can, etc)
Analog input +/-5 V or +/-10 V differential
Thermal stability 50 ppm/oC
DC offset trim +/-1%
Load limits 0.5 to 3 Ω, 0 to 5 mH
Hum 50/60 Hz less than 100 ppm (rms)
Power supply Switch mode
Regulatory approval Compliant but not certified UL/EN/IEC/CSA C22.2 60601#3
Dimensions 19“ x 9U x 550 mm (22“)
AC power 208 V or 400V, 3-phase, 6 kVA; 50/60 Hz