Ihr Warenkorb
keine Produkte

SEMS-Light

Preis auf Anfrage

Electric and magnetic fields from 10 kHz to 96 MHz (300 MHz option)

The kit consists of:
SEMS Receiver RX
SEMS Transmitter TX
Couple Loop Antennas from 2 MHz to 128 MHz
user-definable frequencies across the range 10 kHz - 96 MHz
Measurement mode in automatic, manual, prequiet, unconnected
SEMS PC Utility software, carrying bag, operation manual in Italian, 2 charger and RS232 PC interface cable
Certificate of Calibration Standard
Compliance with International Standards: MIL-Std-285, IEEE Std 299, EN 50147-1; NSA 65-6

10 Hz resolution
RF Output (Form TX): Zout 50 Ohm, N fem; Maximum power consumption (typical) +30 dBm
RF input (RX Module): 50 Ohm Zin, Nfem; VSWR <1.2; Attenuators 0 ... 20 dB max input level 110 dBuV
IF Bandwidth (Module RX): 3 dB bandwidth 5/150 Hz
Accuracy of minimum attenuation (typical): 10 kHz ... 30 MHz + / - 1 dB 30 MHz .. 300MHz + / - 1.5 dB
I / O interface RS232/Bluetooth
Audible alarm system on the level of attenuation
Antennas: 2 Loop Mod L1 frequency range 2 ... 128 MHz
Set-Up Calibration and Measurement: Pre-programmable by software-SEMS-PC Utility
Operating temperature 0 ° C - 40 ° C
Battery powered non-replaceable rechargeable Li-Ion (6 hours)
Dimensions TX and RX 106X46X194 mm
Weight 708 g Transmitter TX
Receiver RX Weight 774 g
Weight Antennas L1 = 266 g
Dimensions Diameter Loop antennas L1 = 30 cm