Shopping Cart
no products

Measurement & Test Equipment

 
  

Page:  1 

PULSED RESISTIVE MAGNET, +/-10 mT

PULSED RESISTIVE MAGNET, +/-10 mT

Model BFM-300-SPM-100
 
The magnet model BFM-300-SPM-100 simulates pulsed magnetic fields for evaluation of implantable devices. The magnet model BFM-300-SPM features axial field direction and allows dB/dt of over 100 T/s.

price on request
PULSED RESISTIVE MAGNET, +/-30 mT

PULSED RESISTIVE MAGNET, +/-30 mT

Model BFM-180/200-SPMD

The magnet model BFM-180/200-SPMD simulates pulsed magnetic fields for evaluation of implantable devices and can achieve dB/dt of of 400 T/s.
The magnet features vertical field direction and allows radial and axial accesses to samples.

price on request
RESISTIVE DC MAGNET, 50 mT

RESISTIVE DC MAGNET, 50 mT

Model BFM-90SR-500

The DC magnet model BFM-90SR-500 is used for low field MRI and EPR imaging and spectroscopy for small animals.
The magnet is shown with the gradient insert model BFG-73/55, with DC gradients of 150 mT/m. Other gradients, DC and pulsed, with gradient strengths of up to 2,000 mT/m are available.

price on request
RESISTIVE DC MAGNET, 50 mT

RESISTIVE DC MAGNET, 50 mT

Model BFM-710-SR-150

The DC magnet Model BFM-710-SR-150 is used for low field MRI and EPR imaging and spectroscopy of large animals. The magnet is shown with optional gradient model BFG-600/300.

price on request
RESISTIVE DC MAGNET, 50 mT

RESISTIVE DC MAGNET, 50 mT

Model BFM-200-DR-420

The DC magnet model BFM-200-DR-420 is used for low field MRI and EPR imaging and spectroscopy. The magnet provides access to the sample in the axial and radial directions.
The magnet has an integrated 10 gauss sweep coil and is shown with an optional 3-axis gradient coil, model BFG-F-200/150.

price on request
RESISTIVE DC MAGNET, 50 mT

RESISTIVE DC MAGNET, 50 mT

Model BFM-300SR-500

The magnet Model BFM-300SR-500 can be operated in DC and pulsed modes. The magnet is used for low field MRI and EPR imaging and spectroscopy in the DC mode and for evaluation of implantable devices in the pulsed mode.
Shown with optional gradient insert BFG-300/200 with DC gradients of 150 mT/m. Other gradients, DC and pulsed are available with gradients of up to 400 mT/m

price on request
SEMS- SYSTEM OF MEASUREMENT OF SHIELDING EFFECTIVENESS IN LOCAL ENVIRONMENTS AND SCREENED

SEMS- SYSTEM OF MEASUREMENT OF SHIELDING EFFECTIVENESS IN LOCAL ENVIRONMENTS AND SCREENED

 Electric and magnetic fields from 10 kHz to 300 MHz (depends on the antenna used)
The kit consists of:
SEMS RX
SEMS Transmitter TX
Loop Antennas couple from 2 MHz to 128 MHz & Mature biconical antennas from 60 to 300 MHz
2 wireless/RS232
SEMS Software PC Utility, carrying case, operating manual in Italian, 2 chargers and PC interface cable RS232
Certificate of Calibration Standard
Accordance with International Standards: MIL-Std-285, IEEE Std 299, EN 50147-1, NSA 65-6

price on request
SEMS-Light

SEMS-Light

 System for measuring the effectiveness of screening in local environments and screened RM

price on request
  

Page:  1 

Show 1 to 8 (from a total of 8 products)